Cliquez ou faites défiler pour zoomer
Appuyez ou pincez pour zoomer
ANDIS Taille 00000 - Lame de fondu coupe extrêmement proche - 1/125" - 0,2 mm
Cliquez ou faites défiler pour zoomer
Appuyez ou pincez pour zoomer
ANDIS Taille 00000 - Lame de fondu coupe extrêmement proche - 1/125" - 0,2 mm
Cliquez ou faites défiler pour zoomer
Appuyez ou pincez pour zoomer
ANDIS Taille 00000 - Lame de fondu coupe extrêmement proche - 1/125" - 0,2 mm
ANDIS Taille 00000 - Lame de fondu coupe extrêmement proche - 1/125" - 0,2 mm

ANDIS Taille 00000 - Lame de fondu coupe extrêmement proche - 1/125" - 0,2 mm

par ANDIS
Économisez 23 %
$44.06 CAD
$33.78 CAD
Texte pour le meilleur prix

Êtes-vous un barbier/styliste professionnel ou un propriétaire de salon S'INSCRIRE Pour les meilleurs prix au Canada.

SKU ANDIS-64740

Présentation de la lame de fondu ANDIS taille 00000

Obtenez une précision inégalée et des fondus fluides avec la lame de fondu ANDIS taille 00000. Conçue pour une coupe extrêmement précise, cette lame laisse les cheveux sur une longueur de 1/125" (0,2 mm), ce qui la rend parfaite pour obtenir des fondus chauves sans couture et des styles hauts et serrés.

Principales caractéristiques:

  • Coupe extrêmement rapprochée : laisse les cheveux à une longueur de 1/125" (0,2 mm), parfait pour obtenir des fondus chauves sans couture et des styles hauts et serrés avec précision.

  • Jeu de lames chromées à bords en carbone : Le jeu de lames est chromé et comporte des lames à bords en carbone, garantissant durabilité et longévité pour des performances durables.

  • Utilisation polyvalente : idéal pour une utilisation avec les tondeuses à lame amovible Andis, cet ensemble de lames peut également être utilisé avec d'autres marques de tondeuses de type amovible, offrant une polyvalence aux barbiers et stylistes professionnels.

Améliorez votre jeu de décoloration et obtenez des coupes homogènes et précises avec la lame de fondu ANDIS taille 00000. Conçu pour un usage professionnel, cet ensemble de lames offre des performances et une fiabilité exceptionnelles pour tous vos besoins de barbier.

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
K
Kyndle
Fantastic product but...

I've been looking for a blade that would take my hair almost to the skin but not quite. I am very prone to hair bumps and after getting a cut from a barber with both the Andis Outliner (blade version that can be used with removable clippers) that leaves hair 0.1mm and this Andis 00000, I knew this was the right clipper for me.

Having said that, I finally found and purchased the Andis Outliner, 00000, and 0000 blades from Barber Supplies (incredibly fast delivery and great website btw, and i reside in SK) and was horrified initially. Out of the box, the 00000 and Outliner blades cut my head and pulled the hairs! I had no idea this was going to be the case as I was under the impression that these removable blades were "fixed" and required no adjustment, especially brand new, freshly out of the box.

After a fair amount of research, I found that I had to reset the cutting blade gap from the fixed blade. I also had to adjust the tension so it was at 2lbs of pressure. After these adjustments and some blade oil, no more head cuts or hair pulls. I think it would be incredibly helpful if these instructions were given by the manufacturer or supplier (I understand this is a bit of a stretch for the supplier) but this doesn't seem to be common knowledge. I also found this job is one that blade sharpening services would provide which is sad because you just spent anywhere from $30-50 per blade and they need to be adjusted further out of the box.

In closing, these blades are incredible products and I will use them for the rest of my life. THEY MAY REQUIRE PROPER ADJUSTMENT TO WORK AS INTENDED, OUT OF THE BOX.

ps. Using these blades with the Andis Supra ZR2

Produits connexes

Vous avez récemment visionné

Effacer récemment consulté

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
K
Kyndle
Fantastic product but...

I've been looking for a blade that would take my hair almost to the skin but not quite. I am very prone to hair bumps and after getting a cut from a barber with both the Andis Outliner (blade version that can be used with removable clippers) that leaves hair 0.1mm and this Andis 00000, I knew this was the right clipper for me.

Having said that, I finally found and purchased the Andis Outliner, 00000, and 0000 blades from Barber Supplies (incredibly fast delivery and great website btw, and i reside in SK) and was horrified initially. Out of the box, the 00000 and Outliner blades cut my head and pulled the hairs! I had no idea this was going to be the case as I was under the impression that these removable blades were "fixed" and required no adjustment, especially brand new, freshly out of the box.

After a fair amount of research, I found that I had to reset the cutting blade gap from the fixed blade. I also had to adjust the tension so it was at 2lbs of pressure. After these adjustments and some blade oil, no more head cuts or hair pulls. I think it would be incredibly helpful if these instructions were given by the manufacturer or supplier (I understand this is a bit of a stretch for the supplier) but this doesn't seem to be common knowledge. I also found this job is one that blade sharpening services would provide which is sad because you just spent anywhere from $30-50 per blade and they need to be adjusted further out of the box.

In closing, these blades are incredible products and I will use them for the rest of my life. THEY MAY REQUIRE PROPER ADJUSTMENT TO WORK AS INTENDED, OUT OF THE BOX.

ps. Using these blades with the Andis Supra ZR2